- What does the MOSH consultation service cost and who is eligible?
- As an employer, must I fix all identified hazards and how is it verified?
- Will a consultation survey lead to a compliance inspection?
- How much will it cost to correct any identified hazards?
- Can a consultant conduct onsite training sessions?
- Will consultants require access to all areas during a consultation visit?
- How do I prepare for a safety or health visit?
- How long does it take to conduct a consultation?
- How does a Safety survey differ from a Health survey?
- How do I get started?
1. What does the MOSH consultation service cost and who is eligible?
Consultation services are already paid for with your tax dollars and there are no additional charges.
Maryland employers with 250 or less employees on site or 500 employees corporate-wide are eligible for
full-service consultation. Limited services are also available to larger companies.
2. As an employer, must I fix all identified hazards and how is it verified?
The employer is obligated to correct all serious hazards found by the consultant within a reasonable period
of time. Extensions are granted if a hardship is identified and if the employer is providing interim
protection from the hazard for employees. For regular consultation visits a statement of assurance of
correction for each hazard is acceptable. For special program consultations a follow-up visit is usually
conducted to verify the correction of hazards.
3. Will a consultation survey lead to a compliance inspection?
All information is kept confidential. The only time an employer may be referred to compliance is on the rare
occasion a company refuses to correct serious hazards within a reasonable period of time, but only after
Consultation has made every attempt to work with the company to eliminate the hazard.
4. How much will it cost to correct any identified hazards?
The expense in correcting hazards is usually minor. Keep in mind, the long-term and often hidden costs of
failing to correct a hazard are often much greater than the short-term costs of correction.
5. Can a consultant conduct onsite
Onsite training and education by consultants is generally informal, occurring during the process of the
consultation visit, involving both the employer and the employees. Training may also be conducted when an
employer requests a visit for that purpose.
6. Will consultants require access to all areas during a consultation visit?
As the employer, the decision is yours. Although most employers prefer a comprehensive survey, you may
request a visit for specific areas or technical assistance. Also, you may alter the scope of your request or
terminate the visit at any time. MOSH consultants can only visit your site by invitation.
7. How do I prepare for a safety or health visit?
After requesting a visit you will be contacted directly by a MOSH Consultant. Once a visit date has been
determined you should gather any safety and health information or programs (e.g. OSHA 300 Logs) that may be
helpful during the visit.
8. How long does it take to conduct a consultation?
The time may vary from a couple of hours to a full day, depending on the size of your facility and the scope
of assistance requested. Should exposure monitoring be requested or recommended, additional days are scheduled.
9. How does a Safety survey differ from a Health survey?
Safety survey focuses primarily on fire, mechanical, electrical, material handling, and working surface safety.
Health survey focuses primarily on the possibility of exposure to potentially harmful levels of chemical and biological agents, noise, radiation, and heat.
However all conditions evaluated, hazards identified and other findings and recommendations made are limited to workers safety.
10. How do I get started?
Consultation services are available upon request by filling out a MOSH Consultation Services Request For Assistance